I make  Arts and Crafts style legs from four pieces of quarter-sawn white oak to maximize the ray-fleck pattern on all four sides. I also try and cut the four pieces from the same board, allowing the grain pattern to wrap around the leg. I use a locking miter joint, cut on a shaper, to assemble the legs. Sometimes, when gluing and clamping the legs, the locking miter joint does not close up completely. Whether from too much glue in the joint, insufficient clamping pressure, or some unexplainable force–maybe karma–I get an unattractive gap in the leg. Normally, this gap won’t be more than a 1/16″, and can easily be closed with a simple burnishing procedure. Read the rest of this entry »